5 Takeaways That I Learned About Services

How To Jump Start A Car Because you do not know when your car battery will fail to work, you should be well equipped with knowledge on how to jump start your car safely. There are professional who are well experienced on the issues concerning car jump start who you should contact when you are not getting everything right because however much it can be easy, if you make an error it can be hazardous. The main thing to have is jumper cables before you are set for jump starting your car. The following procedures are to help you in jump starting your car safely. Your owner’s manual are to help you locate where your battery is or if you know where it is located the batter. The position of the car providing the jump and your car should be in a correct position. If the car providing the jump is in a wrong position you might suffer the problem of the jumper cable not reaching your car battery so you should ensure that it is positioned well. Ensure that the jumper cables reach both the car’s battery by placing the cars so closely. The hoods of the two cars should remain opened and also the car giving the jump must remain shut off. On end of the jumper cables must be clamped onto the battery of the car providing the jump. There are two clamps of a jumper cable; one part is ideated red to stand for positive and black to stand for negative. The red clamp should be connected to the red terminal of the battery and then the black clamp to the negative terminal of the battery. Ensure that the clamps do not touch each other which can cause a very risky electrical spark and you have to make sure that the clamps are connected correctly according to the colors in both cars.
Getting To The Point – Automobiles
The connection of the black clamp to the engine, reduces the spark produces around the battery. Having considered the above procedures, you can now turn on the engine of the car providing the jump to ensure that the dead battery is charge and the engine should be on for about ten minutes. You should observe keenly whether your car will start by turning the key in your ignition.
A Brief History of Services
There is a way you should remove the clamps from both batteries, that is, remove the black clamps and then followed by the red clamp after ensuring that your car engine can start. A car technician can help you identify if there I any problem that might have caused the battery to die.